Call TestResources at 1-800-430-6536
 
Instron Upgrades, Universal Test Machines, Fatigue Test Machines, Related Accessories
 
  TestResources offers test fixtures, ovens, grips and other test machine accessories compatible with Instron ® machines.
We also offer control system upgrades and a broad line of new general purpose test machines as summarized below.
 
 
   
Upgrades and Accessories
for Your Test Machine
Fatigue Test Machines Universal Test Machines
 
 
Please call us at 1.800.430.6536 to speak with an applications engineer.

 
  Biomedical Applications   Accessories & Fixtures   Test Machines  
 

Biomedical Fixtures
Orthopedic Test Equipment
Educational Testing Products
Medical Device Tester
Dental Implant Tester
Spinal Device Fatigue Testers
Biomaterials Test
Tissue Test Equipment

 

Tensile Grips
Wedge Grips
Pneumatic Grips
Tensile Holders
Peel Test Fixtures and Resources
Capstan Grips
Compression Platens
Bend & Flexural Fixtures
Chambers, Furnaces, Ovens
Extensometers

 

Electromechanical Test Machines
Fatigue Testers & Machines
Torsion Test Machines
Axial Torsional Test Equipment
Servohydraulic Test Systems
Planar Biaxial Test Systems
Servohydraulic Retrofits - Fatigue
Horizontal Test Machines

 
  By Test Method   By Material or Product   Fatigue Testing  
 

ASTM Test Resources
ISO Test Resources
Bend & Flex Testers
Compression Test Machines
Shear Test Machine
Tear strength Testers
Tensile Test Equipment
Peel Test Equipment


 

Carbon Testing
Ceramics Testing
Concrete Testing
Rubber & Elastomer Testing
Composites Testing
Foam Testing
Geosynthetics Testing
Metal Testing
Paper Testing
Plastics Testing
Textiles Testing
Wood Testing
Glass Testing
Wire Testing

 

Fatigue Test Equipment
Low & High Cycle Fatigue
Fatigue Crack Growth
Dynamic Properties
Fracture Mechanics

 
 
TestResources accessories are compatible with all test machines - using adapters available from TestResources.

www.testresources.net

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
  modulus iso astm flexural modulus plastic iso system is iso 178 flexural modulus secant iso 178 flexural modulus test iso 178 flexural strength and span length and iso 178 flexural strength iso 178 flexural strength iso span flexural strength measurement following iso 6872 flexural stress in plastic iso 178 flexural test astm d790 and iso 178 flexural test astm d790 fixtures iso 178 polyprop flexural test iso 178 flexural test iso 178 results flexural test iso 178 speed flexure fixture iso 178 flexure testing iso 178 fnct full notch creep test iso 16770 on utm fnct iso 16770 foam compression test per iso 2439 foam fatigue iso 3385 foam fatique test iso test equipment foam testing iso 844 hardness foam tests iso astm four point bending bars iso standards free download iso 13003 free iso 10447 free iso 10447 download grip separation and iso 527 grips iso 14126 grroved pins iso 8749 ild iso 2439 impact strength iso 9653 in plane tensile properties to iso 527 installation instructions motorcycle kuryakyn iso grips instron bending jig iso 4 point instron flexural modulus iso 178 instron iso 5081 grip instron software iso 178 instron tensile machine astm d638 iso 527 test interpretation of iso tests for plywood bond strength intervertebral disc astm iso wear iso 10059 part 1 iso 10123 iso 10123 test iso 10275 iso 10334 iso 10373 bond strength iso 10373 peel tests iso 10373 peeling resistance iso 10447 iso 10447 free download iso 10447 standard iso 10555 1 summary iso 10555 tensile test rate iso 10555 tensile test speed iso 10555 test chart iso 10555 test method iso 10635 iso 10984 iso 10984 1 iso 10984 test machine iso 1099 iso 10993 iso 10993 cytotoxicity assay iso 11003 iso 11003 1 iso 11339 astm iso 11339 astm d1876 iso 11405 iso 11607 iso 11607 contact lens sealing test iso 11607 guidelines iso 11607 new jersey iso 11607 pdf free iso 11607 peel iso 11607 peel strength iso 11607 pull test iso 11607 seal strength testing machine iso 11607 standard pdf iso 11644 iso 11970 iso 12048 packaging iso 1209 iso 12100 safety of machinery iso 12103 1 test dust iso 12106 iso 12135 iso 12189 iso 12189 astm f2346 comparison fatigue iso 12189 facet joint iso 12236 iso 1288 bend tests iso 13003 iso 13445 iso 13586 iso 13820 iso 13951 iso 13953 iso 13953 test fixture iso 13953 test piece iso 13953 type a iso 13954 iso 13954 testing laboratory iso 14125 iso 14125 flexural iso 14129 iso 14129 fixture iso 1421 iso 1421 strength iso 14236 iso 14270 iso 14324 iso 14347 iso 14347fatigue test iso 14477 iso 14589 iso 14676 iso 14704 fixture iso 14704 instron iso 14801 iso 14801 fixture iso 14801 implants download iso 14801 load device iso 14879 iso 14916 iso 15024 iso 15310 iso 15509 iso 15527 iso 15579 iso 15630 1 iso 15630 elongation test method iso 15630 links iso 15653 iso 15654 iso 15754 iso 15850 iso 16402 iso 16770 iso 16770 test description iso 16770 test lab iso 16889 test bench iso 17025 laboratories that test equipment iso 17025 tensile test procedure iso 17697 iso 17706 iso 178 & astm d 790 driepunts buigproef iso 178 & astm d 790 three point bending test iso 178 4 point iso 178 4 point flexural strength test iso 178 and 527 instron iso 178 and astm d 790 difference iso 178 astm d 638 iso 178 astm d790 iso 178 bending iso 178 bending test iso 178 compared with iso 527 iso 178 conditions iso 178 d790 iso 178 d790 composite iso 178 fixture iso 178 flex iso 178 flex modulus standard iso 178 flexural iso 178 flexural modulus iso 178 flexural modulus span iso 178 flexural plastics iso 178 flexural strength span iso 178 flexural test iso 178 flexural testing iso 178 free iso 178 gauge length 10mm x 4mm x 80mm gauge length iso 178 grips iso 178 information iso 178 instron iso 178 machine iso 178 measure iso 178 nl iso 178 parameters iso 178 pdf iso 178 plastic flexural test iso 178 plastics test iso 178 rate iso 178 sample iso 178 setup iso 178 span iso 178 span length iso 178 span to thickness iso 178 speciemen size iso 178 specimen dimension iso 178 specimen size iso 178 specimen tolerances iso 178 standard iso 178 test iso 178 test fixtures iso 178 test procedure iso 178 test specimen iso 178 test speed iso 178 testing aparatus iso 178 testing definitions iso 178 testing fixture iso 178 vs astm d790 iso 178 vs astm d790 comparison iso 178 vs d790 iso 178 vs iso 527 iso 178 youngs modulus iso 178 test method free iso 1798 iso 1798 test speed foam iso 1817 test liquid 101 iso 1827 iso 1827 fatique iso 1856 iso 18872 iso 18872 plastics iso 1920 10 iso 1922 iso 1924 iso 1926 iso 20032 iso 22088 iso 22088 environmental stress iso 22157 iso 22157 1 2004 iso 22214 iso 22477 1 geotechnical investigation and testing testing of geotechnical structures part 1 pile load test by static axially loaded compression iso 2285 iso 2285 method iso 22889 iso 2308 iso 23146 fiber reinforced iso 2409 cross cut testers iso 2411 astm d1876 iso 2439 iso 2439 & ild iso 2439 1100n iso 2439 2008 iso 2439 b iso 2439 c iso 2439 cushion iso 2439 device iso 2439 equipment iso 2439 foam iso 2439 ild iso 2439 method a iso 2439 method b iso 2439 method c iso 2439 standard iso 2439 tensile strength test e iso 2439 test iso 2439 test instrument iso 2439 test standart iso 2439 testing iso 252 iso 25217 iso 26203 iso 26203 1 iso 27306 iso 2740 iso 2759 iso 27727 iso 2819 1980 iso 29073 3 iso 29765 iso 29862 iso 29863 iso 3 point bend test iso 3 point bend test for fatigue iso 3 point bending iso 3 point bending flexural test of metals iso 3 point bending support span iso 3 point bending test iso 3 point bending test of metals iso 3056 iso 3076 iso 3108 iso 3108 standards iso 3167 adhesive iso 3303 burst iso 3341 iso 3354 1 iso 3376 iso 3379 iso 3384 iso 3385 iso 3386 iso 34 iso 34 1 2004 pdf iso 34 2 iso 3501 iso 3501 testing machine iso 3574 properties iso 3574 tensile yield iso 36 adhesion iso 37 iso 37 iso 527 iso 1924 iso 13934 iso 37 loading rates iso 37 rubber iso 37 rubber tensile testing iso 37 rubber vulcanized or thermoplastic determination of tensile stress iso 37 tensile specimen dimensions iso 37 tensile test specimen iso 37 test method iso 3781 iso 3800 iso 3800 fixture iso 3800 walter bai iso 3928 iso 3point bending test iso 3pt flex test iso 3pt flex test specimen size iso 4 point bending iso 4 point bending support spacing iso 4 pt bending iso 4074 iso 4136 iso 4136 free iso 4136 tensiles iso 4195 iso 4578 iso 4578 drum peel iso 4578 en 1464 iso 4578 free iso 4578 tack ca iso 4578 test fixture iso 4578 test standard iso 4587 iso 4587 method iso 4587 standard iso 4587 test iso 4587 test rig iso 4647 iso 4649 b 2 test device rubber disc iso 4point bending iso 5178 destructive tests on welds in metallic materials iso 527 iso 527 1 iso 527 1 pdf iso 527 1 2 iso 527 1 2 astm d 638 iso 527 1 2 astm d638 iso 527 1 2 y astm d 638 iso 527 1 calculation tensile strength iso 527 1 dog bone shaped specimen dimensions iso 527 1 dogbone iso 527 1 dogbone shaped dimensions iso 527 1 elongation iso 527 1 modulus iso 527 1 secant iso 527 1 secant modulus iso 527 1 specimen dimensions iso 527 1 specimen geometry iso 527 1 specimen size iso 527 1 specimens iso 527 1 speed iso 527 1 test speed iso 527 178 tensile flexural iso 527 2 rate iso 527 2 specimen dimension iso 527 2 test speed iso 527 3 iso 527 3 astm d882 iso 527 3 force iso 527 3 free iso 527 3 gauge length iso 527 3 grip separation iso 527 3 in lloyd iso 527 3 pdf iso 527 3 samples iso 527 3 specimen iso 527 3 specimen dimensions iso 527 3 speed iso 527 3 speed of testing iso 527 3 spicemen dimensions iso 527 3 test speed iso 527 3 testing speed iso 527 3 type 5 iso 527 3 version iso 527 4 iso 527 4 young modules iso 527 5 test standard iso 527 5a cutter iso 527 5a specimen dimensions iso 527 a flexural iso 527 and astm d638 iso 527 and test speed iso 527 astm d 638 iso 527 astm d 882 iso 527 astm d638 iso 527 astm d638 difference iso 527 astm  

TestResources Inc. Corporate Headquarters - 701 Canterbury Road, Shakopee, MN, 55379, USA
USA Toll Free: 1.800.430.6536 | +1.952.944.6534 | Fax: 1.952.233.3682

Copyright 1998 - 2015 — TestResources Inc. All rights reserved. Site designed for Internet Explorer 5.5 and Netscape 6.0 and later.