Call TestResources at 1-800-430-6536

3543-0600

The 3543 features a unique pull apart design that enables the extensometer to be used in rugged tensile test applications such as rebar testing, where the sample ridges prohibit use of extensometers that slide when they reach their end stops. In addition, the unit design makes the creation of long or non-standard gage lengths easy. Travel is available in 1,2 and 4 inch increments. Note: Photo is of 12 inch version.
 
 ModelDescriptionGage LengthLinearity
3543-0600Long Gage Length / Long Travel Extensometers - standard temperature range is -40C to +100C (-40F to +210F)
6.000 in
0.15 %
OptionDescription.. 
-100Standard Unit
1.000 inches
. .
-200Standard Unit
2.000 inches
. .
-400Standard Unit
4.000 inches
. .
C-STDSelect connector to match machines from Instron (older mil style), MTS (newer Bendix PT01A type), Satec (mil type or mini-DIN), Tinius Olsen (290 electronics), Schenck, ATS, United and most other controllers.
. .
. .
C-MTSMTS older type Amphenol 165 connector (large silver connector)
. .
. .
C-INSInstron-compatible self-identifying connector (D-sub 25 pin), complete for self calibration, self identifying resistors, shunt resistors and required relays, calibrated.
. .
. .
LTUnit with operating temperature -265 to +100°C (-450 to +210°F)
 
. .
H1Unit with operating temperature -40 to +150°C (-40 to +300°F)
 
. .
H2Unit with operating temperature -40 to +175°C (-40 to +350°F) - Short term use to +200 °C (400 °F) acceptable.
 
. .

TestResources Inc. Corporate Headquarters - 701 Canterbury Road South, Shakopee, MN, 55379, USA
USA Toll Free: 1.800.430.6536 | +1.952.944.6534 | Fax: 1.952.233.3682

Copyright 1998 - 2015 — TestResources Inc. All rights reserved. Site designed for Internet Explorer 5.5 and Netscape 6.0 and later.